Remember When Restorations-
-
Original decals that you designate to
salvage will be carefully papered & masked prior to paint removal &
cleaned & clearcoated after final paint coat has dried-
-
All moving parts & mechanical windings will
be cleaned & lubricated-
-
Wooden parts will be stripped, filled as
necessary, primed, sanded & painted or stained to match original finish
as close as possible-
-
Leather, vinyl, cloth, rubber or other
similar materials that will be salvaged will be cleaned & dressed as
required-
-
Inner wired solid rubber tires will be
removed from rims, cleaned, dressed & re-attached to rims-
-
Sanding, buffing & polishing of respectable
trim pieces to be salvaged- i.e.- stainless steel, aluminum, brass,
copper, etc.-
-
Decent/salvageable graphics related to tin
litho are cleaned & waxed or clearcoated (your choice)-
-
Bad original cloth wrapped wiring (depending
on gauge) will be matched as close as possible & replaced with new same-
-
Hand painting of raised, extruded or stamped
metal letters, numbers & symbols-
-
-
Sanding & filling of major pitting-
-
Cleaning & polishing of scratched/dull
plastic lenses-
-
Application of special paints like
hammertone, wrinkle & granite-
-
Riveted parts will be drilled out & replaced
with new rivets, pop rivets or driveless head bolts-
The above referenced services are by no means
the full extent of my work. Please contact me for more specific needs-
|